Jump to :

Outdoor Projector Screens FAQ’s Yard Master 2 SeriesYard Master 2 Rear Series

 

Outdoor Projector Screens FAQ’s

A: Yes, you can buy a screen material sample by clicking here.

Yard Master 2 Series

A: Below are the steps to disassemble your screen. For the full Yard Master 2 user guide, click here.

  1. Remove ropes (G) and stakes (I) from the ground.
  2. Unlatch the hinged support bars on front side of each leg so that it is bent and fold that half of the legs up for the next step.
  3. Slowly lower the screen to the ground (towards the closed legs). Two people are needed for this step.
  4. Unlatch the hinged support bars and fold down other half of legs.
  5. Loosen and remove the ropes, knob screws (E) and eyebolts (F) from each leg.
  6. Remove the frame legs (B) from the folding frame (A).
  7. Detach the screen material (D) from the folding frame (A) by carefully unsnapping each button as shown.
  8. Fold screen material (D) in half, folding the bottom of the screen towards the top. Then, fold in half again in the same way. Lastly, fold the material into thirds to condense the length, see user guide for visual.
    *If you prefer to roll the material, instead of folding into thirds, roll from one end to the other after folding in half twice.
  9. Unlatch the hinged support bars in each corner of the folding frame (A).
  10. Press in the silver locking buttons, near the folding joints, and slowly gather the sides of the folding frame
  11. Again, press in the silver locking buttons. Then, pick up one end of the folding frame, and walk it to the other end, folding the longer sections into thirds.
  12. Store the screen in the provided carrying bag (h). Be sure to place folding frame, legs, and smaller parts into the carrying bag first and place the material on top to keep material from creasing or tearing.
A: Eventually, yes. It is recommended that no projection screen, regardless of manufacturer/model be permanently left outside and exposed directly to the elements.  The yardmaster is made for temporary outdoor events such as day excursions or weekend camping trips. It has an aluminum frame that is coated in a rust-resistant black enamel for outdoor events. Just like any other piece of audio-video equipment, proper care and storage is required to maximize the Yardmaster’s operational lifespan.

A: Here is a full list of the model numbers in the Yard Master 2 Series: OMS100H2, OMS120H2, OMS100HR2, OMS120HR2

A: No, both the Yard Master and Yard Master 2 Series have a fixed height and length for all leg and frame parts included. The Yard Master 2 Series, however, does have optional extension legs that can be purchased to increase the bottom viewing area. Please click here for more information.

A: Yes, optional extension legs can be purchased to increase the bottom viewing area. Please click here for more information.

A: In a calm wind below 10mph, yes. If it exceeds the 10mph, there is a chance of damaging the frame or the material itself.

A: The Yard Master 2 screen material is folded so that it can fit into a smaller package to decrease freight cost. If you notice crease lines on the material upon opening the box, there are a couple of things that can be done to alleviate them. The easiest method would be to allow the material to stretch on the Yard Master 2 frame. Over time, the creases will alleviate to a minimal.
If after a few days you do not see any improvement, the second method in alleviating them would be the use of a hairdryer. Set the dryer on medium heat and blow on the material from its back side from about 3 feet away, concentrating only on the crease lines. Do not apply excessive heat as this will cause for the material to deform. You may need to repeat this process for a couple of consecutive days depending on the severity of the creases.

Yard Master 2 Rear Series

A: Below are the steps to disassemble your screen. For the full Yard Master 2 user guide, click here.

  1. Remove ropes (G) and stakes (I) from the ground.
  2. Unlatch the hinged support bars on front side of each leg so that it is bent and fold that half of the legs up for the next step.
  3. Slowly lower the screen to the ground (towards the closed legs). Two people are needed for this step.
  4. Unlatch the hinged support bars and fold down other half of legs.
  5. Loosen and remove the ropes, knob screws (E) and eyebolts (F) from each leg.
  6. Remove the frame legs (B) from the folding frame (A).
  7. Detach the screen material (D) from the folding frame (A) by carefully unsnapping each button as shown.
  8. Fold screen material (D) in half, folding the bottom of the screen towards the top. Then, fold in half again in the same way. Lastly, fold the material into thirds to condense the length, see user guide for visual.
    *If you prefer to roll the material, instead of folding into thirds, roll from one end to the other after folding in half twice.
  9. Unlatch the hinged support bars in each corner of the folding frame (A).
  10. Press in the silver locking buttons, near the folding joints, and slowly gather the sides of the folding frame
  11. Again, press in the silver locking buttons. Then, pick up one end of the folding frame, and walk it to the other end, folding the longer sections into thirds.
  12. Store the screen in the provided carrying bag (h). Be sure to place folding frame, legs, and smaller parts into the carrying bag first and place the material on top to keep material from creasing or tearing.
A: Eventually, yes. It is recommended that no projection screen, regardless of manufacturer/model be permanently left outside and exposed directly to the elements.  The yardmaster is made for temporary outdoor events such as day excursions or weekend camping trips. It has a rolled sheet steel alloy frame that is coated in a rust-resistant black enamel for outdoor events. Just like any other piece of audio-video equipment, proper care and storage is required to maximize the Yardmaster’s operational lifespan.

A: Here is a full list of the model numbers in the Yard Master 2 Series: OMS100HR2, OMS120HR2

A: In a calm wind below 10mph, yes. If it exceeds the 10mph, there is a chance of damaging the frame or the material itself.

A: The Yard Master 2 screen material is folded so that it can fit into a smaller package to decrease freight cost. If you notice crease lines on the material upon opening the box, there are a couple of things that can be done to alleviate them. The easiest method would be to allow the material to stretch on the Yard Master 2 frame. Over time, the creases will alleviate to a minimal.
If after a few days you do not see any improvement, the second method in alleviating them would be the use of a hairdryer. Set the dryer on medium heat and blow on the material from its back side from about 3 feet away, concentrating only on the crease lines. Do not apply excessive heat as this will cause for the material to deform. You may need to repeat this process for a couple of consecutive days depending on the severity of the creases.

A: No, both the Yard Master and Yard Master 2 Series have a fixed height and length for all leg and frame parts included. The Yard Master 2 Series, however, does have optional extension legs that can be purchased to increase the bottom viewing area. Please click here for more information.

A: Yes, optional extension legs can be purchased to increase the bottom viewing area. Please click here for more information.